Si20-701_B Troubleshooting by Remote Controller
406
Remote Controller Display
U5
Applicable Models
RZ(Y)
Method of Error Detection
Micro-computer checks if transmission between indoor
unit and remote controller is normal.
Error Decision Conditions
When transmission is not carried out normally for a
certain amount of time
Supposed Causes
îš„ Defective remote controller
îš„ Defective indoor unit PCB
îš„ External factor (Noise, etc.)
îš„ Connection of 2 main remote controllers (When using
2 remote controllers)
To Next Page
Loading...
Need help?
General
