6 | Operation
User reference guide
39
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625990-1D – 2022.09
Menu Description
Connection status check
WPS connection setting
AP mode/RUN mode (SSID + KEY) connection setting
Reset to factory default
Wireless LAN OFF
To confirm the wireless LAN connection status
1 On the home screen, press for at least 5 seconds while the unit is not
operating.
Result: SP appears on the display. is blinking.
2 Press to confirm the selection.
Result: is blinking.
3 Check the Daikin eye.
a Daikin eye
b Partly green
c Red, orange, blue or white
Daikin eye colour alternates between
partly green and…
…then wireless adapter is…
red not connected
orange running and ready to connect to the
home network via WPS button; see "To
connect using the WPS button"[440].
blue ▪ connected to the home network via
SSID + KEY.
or
▪ connected to the home network via
WPS button on the router.
white off
4 Press to exit the menu.
Result: The display will return to the home screen.
To connect the wireless LAN to your home network
The wireless adapter can be connected to your home network using the:
▪ WPS button (Wi-Fi Protected Setup) on the router (if present),