Daikin SiBE041010 - Page 137

SiBE041010 Outdoor Unit
Removal Procedure 127
3
Disconnect the
connector for electronic
expansion valve coil
[S20].
4
Detach the clamp of the
lead wire for the
electronic expansion
valve coil.
5
Disconnect the relay
connector for the
compressor motor.

Pay attention so as not to
lose the fixture.

When reassembling, do not
insert the thermistor up to
the dent of fixture.
6
Release the discharge
pipe thermistor.
Step
Procedure Points
[S20]
(R7390)
Clamp
(R7391)
(R7392)
Dent
Fixture
Discharge pipe thermistor
(R7393)