19
Useful Functions
Remote controller Unit
Useful Functions
Using the Child Proof Lock
Button operation is restricted, preventing misoperation by small children.
Remote controller
Hold down
for about 2
seconds.
Unit
Cannot be set from unit.
• Hold down
for 2 seconds again to turn off child proof lock.
• When child proof lock is active, operations will be restricted. When buttons are pressed, only a tone (3 short beeps) will
sound, preventing misoperation by small children.
Note
• If the unit is unplugged when child proof lock is active, child proof lock is turned off.
• The child proof lock lamp [orange] lights up when the function is active.
Adjusting Indicator Lamp Brightness
Indicator lamp brightness is adjustable.
Remote controller
Press
.
Unit
Cannot be set from unit.
• Press to cycle between settings.
BRIGHT DIM OFF
Note
• This function is useful if the lamps bother you during sleep hours etc.
• The ON/OFF lamp and water supply lamp do not turn off even if the brightness is set to OFF.
These lamps will be set to DIM.
• If any of the below buttons are pressed when brightness is set to OFF, brightness will change to DIM and return to OFF after
about 10 seconds.
· · · · · ·
01_EN_3P595628-1B.indd 19 2020/04/17 15:49:06