Si39-303 Selection of Location
Installation Manual 163
•
Locations where sulfurous acids and other corrosive gases may be present in the
atmosphere.
Copper piping and soldered joints may corrode, causing refrigerant to leak.
•
Locations where equipment that produces electromagnetic waves is found.
The electromagnetic waves may cause the control system to malfunction, preventing
normal operation.
•
Locations where flammable gases may leak, where thinner, gasoline, and other volatile
substances are handled, or where carbon dust and other incendiary substances are found
in the atmosphere.
Leaked gas may accumulate around the unit, causing an explosion.
To Next Page
Loading...
