Daikin VRV II Series - Page 190

Field Wiring Si39-303
184 Installation Manual
1. Retain with accessory clamps (3).
2. Electric wiring
3. Wiring between units
4. Retain to the electric box with the accessory clamps (1).
5. When routing out the power/ground wires from the right side:
6. When routing the remote control cord and inter-unit wiring, secure clearance of 50 mm or more from the
power wiring. Ensure that the power wiring does not contact any heated sections ( ).
7. Retain to the back of the column support with the accessory clamps (2).
8. When routing out the inter-unit wirings from the opening for piping:
9. When routing out the power/ground wires from the front:
10. When routing out the ground wires from the left side:
11. Grounding wire
12. When wiring, exercise sufficient caution not to detach the acoustic insulators from the compressor.
13. Retain to the back of the column support with the accessory clamps (2).
14. Section A
15. Section B
16. Power supply
17. Branch switch, overcurrent breaker
18. Earth leakage breaker
19. Ground wire
20. Unit A
21. Unit B
22. Unit C
1
4
5
7
8
9
7
10
11
12
8
13
2
2
3
3
5
6
[ RXYQ12
.
14
.
16 type ]
[ RXYQ5
.
8
.
10 type ]
7
8
9
8
14 15
16
17
18
19
20 21 22
10
11
1
4
In the case
RXYQ5 type
In the case
RXYQ8
.
10 type