DAITEM 473-29X - 8. Programming for Calls to an ARC (Alarm Receiving Co.); 8.1 Programming the Call Numbers and Transmission Type

44 pages

Save Page as PDF

To Next Page

To Previous Page

3URJUDPPLQJIRUFDOOVWRDQ$5&$ODUP5HFHLYLQJ&R

$5&

FRQQHFWLRQWR'DLWHPVHUYLFHV,IWKHV\VWHPLVFRQQHFWHGWRDGLIIHUHQW$5&

(QWHUWKH,3DGGUHVVSURYLGHGE\\RXU$ODUP5HFHLYLQJ&R

Main Page

Contents2
Safety Information3
Content and Description4
Product View and Parts Identification4
Operation5
Operating Modes5
Installation Mode5
List of Commands Possible During the Listen-In Period6
The Type of Events Transmitted6
Test Mode6
User Mode6
Priority-Based Processing of Messages Received7
Telephone Call Cycles7
System Correspondent7
Example: Voice Call to Individuals7
Different Applications8
Application with an Alarm Control Panel8
Configuration Without an Alarm Control Panel, in Standalone Mode8
Specific Operation with an Ip/Ethernet Connection8
Preparation9
Opening the Dialler9
Inserting the SIM Card and Battery9
Connecting the 910-21X Mains Adapter9
Main Programming Operations10
Essential Programming (Language/Date/Size of Codes/Installer Code)10
How to Use the Keys on the Keypad10
Programming the PIN Code11
Selecting the Internal or External Antenna11
Recognition Programming with an Alarm Control Panel12
Programming the Dialler to Recognise the Control Panel12
Programming Control Panel to Recognise Image Transmission Detectors13
Recognition Programming with a Control Panel Fitted with Software13
Checking Recognition Programming14
Rogramming the Control Panel to Recognise the Detector14
Programming the Detector to Recognise the Control Panel14
Programming Dialler to Recognise Image Transmission Motion Detectors15
Testing Radio Link between Dialler and Image Transmission Detector(S)15
Programming the Dialler to Recognise Technical and Fire Detectors16
Programming the Dialler to Recognise Control Devices (Alarm Pendant)16
Programming for Calls to Individual Correspondents17
Programming Call Numbers and Transmission Type17
Procedure for a Voice Call to an Individual17
Programming the Type of Events Transmitted18
Programming a Periodic Call to an Individual Correspondent18
Programming Arm/Disarm Transmission Via SMS19
Recording the Personalised Welcome Voice Message19
Programming the SMS Voice ID Number19
Programming Linked to Image Transmission Detectors20
Programming for Calls to an ARC (Alarm Receiving Co.)22
Programming the Call Numbers and Transmission Type22
Programming the Type of Event Transmitted23
Programming a Periodic Call to an ARC (Alarm Receiving Co.)23
Programming Arm/Disarm Command Transmission24
Programming Linked to GPRS Transmission24
Advanced Programming25
Dialler Image Transmission Test25
Programming the Dialler as Back-Up to a PSTN Dialler25
Programming the Dialler to Recognise the Relayed Control Panel25
Programming the “Credit Monitoring” Function (Use of Prepaid Card)26
Programming the Control Panel to Recognise the Relay26
Programming the Dialler to Recognise the Relay26
Programming Inputs and Outputs28
Programming Personalised Voice Messages for Inputs29
Programming Personalised Voice Messages for Intrusion Groups30
Ethernet Connection and Programming (IP Link)30
Procedure for Deleting a Product Programmed for Recognition31
Connecting and Testing the Connected Inputs/Outputs32
Wiring Diagram32
Testing the Call Numbers Programmed33
Testing Inputs and Outputs33
Installing the Dialler34
Choosing the Best Place to Install the Dialler34
Testing the GSM Network Reception Level34
Position the GSM Dialler in the Place Where It Is to be Installed34
Fixing the Device in Place35
Connecting an External Antenna35
Performing Real Tests36
Programming Error Indication36
Battery Fault Indication36
Changing the GSM Dialler Power Pack and Battery37
Programming the Date and Hour37
Consulting the Events Log38
Troubleshooting38
Quick User Guide39
Summary Table of Voice Messages and SMS39
Summary Table of Possible Programming40
Summary Table of Remote Control Commands40
Summary Table of Codes for ARC (Alarm Receiving Co.) Calls42
Technical Data43

Related product manuals

DAITEM ALARM SYSTEM AND DIALLER

DAITEM 473-29X - 8. Programming for Calls to an ARC (Alarm Receiving Co.); 8.1 Programming the Call Numbers and Transmission Type

Table of Contents

Related product manuals