Dake J-10 - User Manual

6/02
1
*** PLEASE NOTE****
This manual is for Dake Johnson manufactured J & JH horizontal bandsaws from 1985 to
current.
If your model is prior to 1985, please contact the factory for manual and parts information.
1938 - 1965 Johnson manufactured J saws.
1965 - 1984 Kysor/Johnson manufactured J & JH saws.

Summary

Basic Machine Data

Safety Information

Safety Instructions

General safety precautions for operating the machine, including reading the manual and using safety gear.

Hazard Labels and Warnings

Danger Label (84395)

High voltage hazard warning and lockout procedure.

Safety and Warning Labels

Details on safety instructions and general warning labels.

Electrical Control Diagrams

Machine Features

Operation

Hydraulic Control

Operation of the hydraulic control valve for descent speed.

Vise Operation

Positioning, quick-release, and handwheel operation of the vise.

Blade Selection

Blade Tracking Adjustment

Idle Wheel Adjustment

Adjusting idle wheel for proper blade tracking.

Drive Wheel Adjustment

Blade Guide Adjustment

Lubrication

Lubrication Schedule and Instructions

Sawing Problems and Solutions

Gearbox Assembly

Hydraulic Assembly Diagram

Guide Arm Assembly

Vise Unit

Dake J-10 Specifications

General

Model	J-10
Type	Horizontal Bandsaw
Motor Power	1 HP
Table Size	15.75 x 15.75 inches
Voltage	110V/220V
Category	Saw
Blade Length	93.5 inches
Capacity Round	10 inches
Cutting Capacity (Round)	10 inches