D&R AIRENCE - Firmware Update Procedure; Introduction to Firmware Updates; Bootloader Mode Entry; Installation of Updatetool

A I R E N C E - U S B M a n u a l P a g e 55
Introducon

‘bootloader
mode’-

Bootloader mode

1) Disconnect power
2) 
3) Connect power
4) Release the encoder switch
Installaon
Airence Firmware Updatetool
An Airence Firmware Updatetool
from the D&R website (www.d-r.nl)
Airence Firmware Updatetool v1.00 - Setup.zip

- Press Next