Instruction CF-RD Room Thermostat with Display
4 VI.UH.Q4.1C Produced by Danfoss Floor Heating Hydronics 03.2007
1. Functional Overview
Front - g. 1
Up/down selector
Push button
Red LED (behind the cover)
LED modes
Permanent light
ON
No light
OFF
Slow ashing
Flashes
Fast ashing
Flickers
Back - g. 2
Back plate
Back plate lock/unlock (turn 90°)
Screw hole for wall mounting
Battery placement
Screw and wall plug
Note: To activate batteries please remove enclosed strips
from batteries
2. Installation
Note:
• To activate batteries in the Room Thermostat please
remove enclosed strips from the batteries.
• The assignment of the Room Thermostats to the Master
Controller should be within 1½m distance