Danfoss AK-PC 781A

70 Capacity controller RS8HE202 © Danfoss 2017-07 AK-PC 781A
Setup Functions for
General purpose
1. Go to Configuration menu
2. Select General purpose
3. Define number of required
functions
In our example we select
one thermostat function for
temperature control in the
compressor room and one alarm
function for monitoring the liquid
level in the receiver.
The following number of different functions can be
defined:
5 thermostats
5 pressostats
5 voltage signal
10 alarm signals
3 PI-regulations
Configuration - continued