What does it mean when the LED ( and *) falshes 5 times on Danfoss CF-MC Controller?
If the LED ( and *) flashes 5 times, it indicates that the installation or link test is unsatisfactory. Check the installation or perform a link test.
General| Brand | Danfoss |
|---|---|
| Model | CF-MC |
| Input Frequency | 50/60 Hz |
| Enclosure Rating | IP20 |
| Mounting | Wall mounting |
| Power Supply | AC |
| Protection Features | Short circuit |
| Operating Temperature | +50°C |
| Relative Humidity | 5 to 95% RH, non-condensing |
| Cooling Method | Convection cooling |
Explains the conditions and scenarios that require resetting the Master Controller in a CF2-system.
Provides step-by-step instructions for performing a factory reset on the Master Controller CF-MC.
Outlines the procedure for resetting CF-RS, -RP, -RD, and -RF Room Thermostats.
Describes the process for resetting the CF-RC Remote Controller.
Provides instructions for resetting the CF-RU Repeater Unit.
To Next Page
