Need help?Do you have a question about the Danfoss Link CC and is the answer not in the manual?
General| Type | Central Controller |
|---|---|
| Communication Protocol | Zigbee |
| Communication | Wireless |
| Protection Class | IP21 |
| Operating Temperature | 0°C to 40°C |
Ensures optimal wireless performance by avoiding metal objects, central placement, and shortest signal paths.
Highlights common errors like metal obstructions, decentral placement, and diagonal wall crossing affecting signals.
Defines repeater unit purpose and criteria for use, considering wall types, distances, and signal strength.
Visual guide for optimal repeater placement to maximize signal strength in single and multi-floor building layouts.
Details adding devices to the Danfoss Link system, specifying distance limits and using a BSU tool for setup.
Guides initial setup: connecting power and configuring regional settings like country, language, and time.
Explains accessing the installation menu via the cover removal and SETUP pin press for 3 seconds.
Covers mounting mains-powered devices and repeaters, emphasizing powering them up before pairing for network connection.
Describes adding various service devices like repeaters and controllers to the Danfoss Link system.
Details creating rooms and adding battery-operated room devices to their assigned locations in the system.
Explains creating rooms and adding devices step-by-step, recommending a sequential approach for setup.
Focuses on configuring room devices for temperature regulation, ensuring correct signal paths as per installation plan.
Outlines conducting a network test post-installation to verify stable communication between all connected devices.
Describes the final step of closing the installation process by pressing the SETUP pin.
Explains adding new devices to an existing room and the necessity of a network test post-modification.
Details adjusting heat regulation settings such as forecasting, max floor temp, and regulation type.
Provides methods for removing devices from the network via button press or backup setup menu procedures.
Describes resetting the Danfoss Link CC to factory settings, removing all rooms and devices from the network.
Details connecting the Danfoss Link CC to a Wi-Fi network, including network selection and password entry.
Guides connecting the Danfoss Link CC to a smart device using the Danfoss Link App from app stores.
Explains how to remove specific connected devices from the system without resetting all remote settings.
Illustrates alert icons on the standby screen, explaining their meanings like battery warnings and device status.
To Next Page
