Danfoss Link CC User Manual

Installation Guide Danfoss Link™ CC
8
12/2014 VISGL90N Danfoss Heating Solutions
2. Introduction
Danfoss Link™ is a programmable, wireless control
system for heating systems in residential buildings (up
to approximately 300 m
2
).
The central controlling unit is the Danfoss Link™ CC
equipped with a colour touch screen, from which the
entire installation can be controlled.
This installation guide contains all information about
the Danfoss Link™ CC and how to get started. It guides
through recommendations and considerations that
must be taken into account when handling a wireless
system - and it describes conguration of the system,
to ensure a smooth and reliable system set-up.
!
Individual instructions, supplied with the service and room devices, contain
information about connecting the respective device to the network. The in-
struction will also state if the device is considered a service or a room device.

Danfoss Link CC Specifications

General

Type	Central Controller
Communication Protocol	Zigbee
Communication	Wireless
Protection Class	IP21
Operating Temperature	0°C to 40°C