Danfoss ECL Comfort 110 User Manual

VI.KT.G6.02 © Danfoss | 2016.05 | 35
Installation
Mounting the ECL Comfort controller
For easy access, you should mount the ECL Comfort controller near the system. Select
one of the three following methods:
• Mounting on a wall
• Mounting on a DIN rail
• Mounting in a panel
Screws and rawlplugs are not supplied.
Mounting on a wall
Mount the controller on a wall with a smooth surface and establish the electrical
connections.
Danfoss 87B787.10
Mounting on a DIN rail
Mount the controller on the DIN rail and establish the electrical connections.
Danfoss 87B788.10
Mounting in a panel
Mounting kit: Order code no. 087B1249.
The panel plate thickness must not exceed 5 mm. Prepare a cut-out with the dimensions
93 x 139 mm. Insert the controller into the panel cut-out and x it with the clamp which
is placed horisontally on the controller. Establish the electrical connections.
Danfoss 87B789.10
For further details on mounting, see the mounting guide.

Danfoss ECL Comfort 110 Specifications

General

Communication Protocol	Modbus RTU
Display Type	LCD
Mounting Type	DIN rail
Digital inputs	4
Relay outputs	2
Analog inputs	2
Enclosure rating	IP20
Power Supply	24 V AC or 24 V DC
Temperature Range	0 to 50 °C
Application	Heating systems
Inputs	Pt1000
Outputs	Relay
Operating Temperature	0 to 50 °C
Storage Temperature	-20 to 60 °C