Danfoss ECL Comfort 296 - Symbols

4 | © Danfoss | 2016.02 VI.KT.Y2.02
ECL Comfort 210 / 296 / 310
Temperature:
Outdoor temp.
Relative humidity indoor
Room temp.
DHW temp.
Position indicator
Mode:
Scheduled mode
Comfort mode
Saving mode
Frost protection mode
Manual mode
Standby
Cooling mode
!
Active output override
Optimized start or stop time
Circuit:
Heating
Cooling
DHW (domestic hot water)
Common controller settings
Controlled component:
Pump ON
Pump OFF
Actuator opens
Actuator closes
42
Actuator, analogue control signal
signal
Alarm
Monitoring temperature sensor
connection
Display selector
Max. and min. value
Trend in outdoor temperature
Wind speed sensor
Sensor not connected / not used
Sensor connection short-circuited
7-23
Fixed comfort day (holiday)
Active inuence
Heating active
Cooling active
Additional symbols, ECA 30 / 31
ECA Remote Control Unit
15
Connection address (master: 15,
slaves: 1 - 9)
Day o
Holiday
Relaxing (extended comfort period)
Going out (extended saving period)
1.0 Symbols
In ECA 30 / 31 only the symbols that are
relevant to the application in the controller
are displayed.