5. Settings & Installation modes
5.1 Setting options via the Danfoss Eco™ App
Command Options
Thermostats
List of the installed Danfoss
Eco™ thermostats (by name)
Option to change the name of the Danfoss
Eco™ or to un-pair an existing Danfoss
Eco™.
Add Danfoss Eco™ Option to add another Danfoss Eco™
Restrictions
PIN Code Option to add a PIN code to the Danfoss
Eco™ App
Change PIN Code Option to change PIN code
Child Lock To protect your Danfoss Eco™ activate the
Child Lock, once activated the Danfoss
Eco™ can only be adjusted by the Danfoss
Eco™ App and the Manual function is
overridden.
Min/Max Temperatures Limit the temperature range. The MIN/
MAX settings are adjusted by scrolling the
temperatures in the Danfoss Eco™ App.
Advanced Settings
Adaptive Learning Adaptive Learning ensures you get the
temperature you asked for at the right
time. Adaptive Learning uses historical
data to determine how fast (degrees/hour)
each room can be reheated.
Heat Control The Heat Control ensures that Danfoss
Eco™reaches the comfort temperature on
time, according to the schedule. Options
are for Moderate or Quick. Moderate en-
sures sufficient return temperature.
Display Rotation The Danfoss Eco™ display can be rotated
by 180°. This allows the display to be read
from hoziontal and vertical mounting.
Mode Mounting Mode
Frost Protection The minimum temperature to protect your
heating system. Set between 4-10°C.
To Next Page
Loading...
