Danfoss EFIT 550 User Guide

18
4.0 Installation - step by step
4.1 Preparations and guidelines
All necessary cables should be routed to the intended •
installation point.
The thermostat is designed for installation in a surface •
mounted box or recessed box with the correct dimensions.
Read and observe the guidelines set forth in section 1.1 •
and 1.2.
4.2 Dismantling the thermostat
Push down the release tab.•
Carefully detach the front cover.•
Remove the two screws.•
Installation manual
Release tab
Screws

Danfoss EFIT 550 Specifications

General

Brand	Danfoss
Model	EFIT 550
Category	Thermostat
Language	English