Danfoss ERC 213 - Advanced Control Functions; 2.6 Defrost on Demand; Technical Specifications

| 10 DKRCE.PI.RL0.G7.ML
Installation Guide | ERC 213
6 - Basic operation
Initiate a manual defrost
Adjust the setpoint temperature
DEFROST: press for 3 seconds to initiate a defsost.
The DEFROST icon is shown during defrost.
DEFROST: press for 3 seconds to stop manual defrost.
(short press) SET: adjust setpoint temperature.
UP/DOWN: change the temperature setpoint
(in setting mode the setpoint flashes).
SET: save the temperature setpoint.
ENGLISH