Danfoss PFM 5001

Balancing
calculation
of a project
with central
pressure
input -
procedure
1. Create two projects - Left Side and Right Side as
describted above.
- Close the Right Side project by a stop valve.
- Measure the Left Side project.
- Close the Left Side project by a stop valve.
- Open and measure the Right Side project.
2. Return to the Project tab
and open one side of the
middle powered project – for
instance Project2. Click on
the Smart phone
Menu/Balancing project
button.
3. Click on Middle power
project balancing button.
4. Open the second side of
the middle powered project –
Project3.
HEC 41