Parameter Conditions for value change
P3730 Max closed loop error [IR, 100=10%] allowed when switching device from AUX to Auto-guidance.
P3731 Minimum time [x10ms] where steady state threshold can't be exceeded to switch device from AUX to Auto-guidance.
P3732 Max closed loop error [IR, 100=10%] before closed loop joystick steering is enabled.
PVED-CLS AUX— open loop joystick transfer function
Open Loop Joystick transfer function scales the position of the open loop joystick to a requested flow.
Parameter Conditions for value change
P3734-P3740 See Section 11.8 in the User Manual for more information
Application Guide
PVED-CLS startup guide
Parameter setting
32 |
©
Danfoss | October 2018 AB285975085591en-000101
To Next Page
Loading...
