Danfoss Secop 105N9502 User Manual

16
MANUAL
FRCC.ES.011.A1.02
TROUBLESHOOTING
1. Parameter De nition Files are not imported.
Solution: The Parameter De nition File contains the parameter data and settings speci c to
one type and version of Secop controller.
For some controllers, the Parameter De nition File must be imported. For others, the software
will automatically obtain the Parameter De nition File from the controller electronics.
When a Parameter De nition File import is required, the system will make a request via a
dialog in the software.
When required, the Parameter De nition File is available from the supplier on a CD or as a
 le attachment via email.
2. Product Keys are not installed.
Solution: The Product Key is an alphanumeric code, which is speci c to one type and version
of Secop controller. The user must enter the Product Key to gain access to the Tool4Cool®
LabEdition functions for the Secop controller.
The user access level is coded into the Product Key, de ning which parameters and level of
the controller the user is entitled to access. For user access at a di erent level, a new Product
Key is required.
A separate Product Key is required for every individual controller type and version to be connected
to a network.
The Product Key is available from the supplier of the application.
3. Polarity on RS485 network interchanged.
Solution: Check your wiring.
4. Addressing on Modbus nodes not di erent to zero.
Solution: Check addressing of individual network nodes.
5. Mismatch in address range in Tool4Cool® and Modbus nodes.
Solution: Check addressing of individual network nodes.
6. Double addressing of Modbus nodes.
Solution: Check addressing of individual network nodes.
The message “please install driver for new hardware” appears when connecting the gateway to
the computer.
Solution: The Secop Bluetooth® Gateway operates on a driver which is normally installed as
standard. Please contact the computer supplier to obtain a driver.
LED2 Sequence Meaning
LED  ashes red for approx. 3 seconds in short,
rapid bursts
...............
RS485 Bluetooth® gateway begins Slave mode
operation
Error Message
Top Causes of Errors
LED2 is  ashing red

Danfoss Secop 105N9502 Specifications

General

Brand	Danfoss
Model	Secop 105N9502
Category	Gateway
Language	English