6
FRCC.ES.011.A1.02
MANUAL PAIRING THE GATEWAY
Windows XP
In order to communicate, Bluetooth® devices must rst be paired. Pairing is performed before using the
device for the rst time. Pairing does not need to be repeated for subsequent use.
Please choose the operating system installed on your computer.
1. Attach or turn on the Bluetooth® radio adapter (transceiver) for your Windows XP computer.
2. Turn on the Secop Bluetooth® gateway by pressing brie y on the push button.
The LED will blink green.
Please note!:
The gateway runs for 60 seconds before shutting down automatically.
At each step of the pairing process, check that the LED is still blinking.
If one stage of the pairing fails, turn the gateway on again, and try again.
3. Open Bluetooth® Devices in Control Panel/Printers and Other Hardware (Category view)
or Control Panel (Classic view).
Control Panel Classic View:
4. On the Devices tab, click Add.
Control Panel Category View:
To Next Page
Loading...
Need help?
General
