Danfoss SET 3E - Wiring

SET3E
6
GB
NOTE: For mains voltage applications links must be fi tted between
terminals L, 2 and 5.
3.1 Wiring
N/O
ON
NOTES:
FOR SET2E LINK
TERMINALS 1 & 5
FP975 ON A SET
WALLPLATE
N
L123
45
6
TIMER
OFF
COM
DHW
ON
N/C
COM
HTG
OFF
N/O
N/C
Typical wiring diagrams for various types of systems are shown on
the following pages.
Note: Whilst every attempt has been made to ensure the accuracy of this
information it is recommended that the specifi c information relating to
the ancillary controls is obtained from the manufacturers concerned.