2 | © Danfoss | Energy Meters | 2020.11 BC200586470576en-020601
Kim Jessen
Approval Engineer, Danfoss Energy Metering
Jeppe Molleskov Blasbjerg
Energy Metering Category Manager
Danfoss only vouches for the correctness of the English version of this declaration. In the event of the declaration being translated into any other
language, the translator concerned shall be liable for the correctness of the translation
ID No: VJSHO202 Revision No: 1
-6430 Nordborg
nmark
one: +45 7488 2222
+45 7449 0949
EU DECLARATION OF CONFORMITY
Danfoss A/S
Danfoss Energy Metering
declares under our sole responsibility that the
Product(s):
Energy Meters
Type(s):
SonoMeter 30
covered by this declaration is in conformity with the following directive(s), standard(s) or other normative
document(s), provided that the product is used in accordance with our instructions.
• MID Directive 2014/32/EU Measuring Instrument Directive
Module B +D
o EN1434-4:2015
Notified Body: Lithuanian Energy Institute, 1621, performed type approval and issued certificate
LT-1621-MI004-022
• EMC Directive 2014/30/EU Electromagnetic Compatibility
1
o EN 61000-6-1:2007
o EN 61000-6-3:2007/A1:2011
o EN 55022:2010
• RoHS Directive 2011/65/EU Restriction of Hazardous substances
o EN 50581:2012
• RED Directive 2014/53/EU Radio Equipment Directive
2
o EN 300 220-2 V3.1.1
o EN 301 489-1 V1.9.2:2011-09
o EN 301 489-3 V1.6.1:2013-06
o EN 62311:2008
o EN 61010-1:2010
o EN 60950-1:2006/A11:2009/A1:2010/A12:2011/AC:2011/A2:2013
• LVD Directive 2014/35/EU Low Voltage Directive
1
o EN 62311:2008
o EN 61010-1:2010
o EN 60950-1:2006/A11:2009/A1:2010/A12:2011/AC:2011/A2:2013
• PED Directive 2017/68/EU
1
For variants with Radio Module the declaration for EMC & LVD shall be ignored
2
For variants without Radio Module the declaration for RED shall be ignored
Installation guide SonoMeter 30
To Next Page
Loading...
Need help?
General
