BC200586470576en-020601 © Danfoss | Energy Meters | 2020.11 | 5
Installation guide SonoMeter 30
- On the wall:
- Panel mounting on standard DIN-rail.
- Adapter plate according to figure 8 of EN1434-2:2007 for wall mounting of calculator can be used (if the
aperture in the wall is too large for the calculator):
Important: It is forbidden to attach the calculator directly to a wall if there is a risk that on walls can
be condensed humidity or temperature of a surface of a wall can fall lower than 5°C. In this case, it is
recommended to attach the calculator so that between it and wall surfaces there was an air gap not
less than 5 cm.
To Next Page
Loading...
Need help?
General
