16 | VUIGI102 © Danfoss | 2018.01
5.3.2.1 Actual window
Fig. 5.7 Actual window
Actual parameters
No. Name Note
1 Counters Data from counters
2 ''Manufacturer number'' Serial number of device
3 Heating energy Heating energy in MWh
4 Cooling energy Cooling energy in MWh
5 Tariff 1 Tariff 1 in MWh (if configured)
6 Tariff 2 Tariff 2 in MWh (if configured)
7 Volume Volume in m
3
8 Pulse input 1 Pulse input 1 volume in m
3
(if configured)
9 Pulse input 2 Pulse input 2 volume in m
3
(if configured)
10 Sensors Data from sensors
11 Temperature 1 (flow) Temperature 1 (forward flow) in ˚C
12 Temperature 2 (return) Temperature 2 (return flow) in ˚C
13 Temp. difference Temperature difference, K
14 Flow Flow rate in m
3
/h
15 Power Power in kW
16 Status information Device status information
17 Device time dd.mm.yyyy hh:mm:ss
18 Working time Total meter working time in hours
19 Error free time Error free time in hours
20 Error date and time Error date and time (dd.mm.yyyy)
21 Error code Last error code
22 Device ID ID number (8 digits decimal number)
23 M-Bus address M-Bus address (decimal number)
24 set Press the button to write time parameter to SonoMeter 30 device
25 set Press the button to write new SonoMeter 30 device ID number
26 set Press the button to write new SonoMeter 30 device M-Bus address
5. Meter access and
configuration
(continuous)
To Next Page
Loading...
Need help?
General
