11
12
13
1. Display
2. PCBA
3. Cover part (PC)
4. Battery (Lithium)
5. Enclosure connection (PC)
6. Transducer (PZT/stainless steel/PEI)
7. Spool piece (Brass)
8. Liner fixture (PPS/PEI/stainless
steel)
9. Liner (PPS)
10. Top part (PC, TPE)
11. Module (PCB)
12. Bottom part (PC)
13. Temperature sensor
6. Disposal
Item Material Disposal
Battery
AA-cell Lithium/thionyl chloride 620
mg Lithium
Approved deposit for lithium
batteries
PCBA with display and com-
munication module
Coppered epoxy laminate components
soldered on, PC, TPE
Electronic waste
Cables Copper with PUR or PVC jackets Cable recovery
Flow sensor
(including transducer and
liner)
Brass, stainless steel, PPS Metal recovery
Transducer PZT, stainless steel, PEI Approved deposit for PZT
Other plastic parts PC, PPS, PEI, TPE Plastic recovery
To Next Page
Loading...
Need help?
General
