Danfoss TP9 Installation Instructions

18
Use + and - buttons until correct day is
shown (MO=Monday, TU=Tuesday etc)
If you are happy to use the preset
programmes on page 16, you don’t need to
do anything else.
Press PROG until colon fl ashes in display.
Your unit is in RUN mode and your heating
and hot water will operate according to the
preset programmes.
Setting the Day (5/2 day mode only)
Accepting the preset programmes
User Instructions
GB

Danfoss TP9 Specifications

General

Brand	Danfoss
Model	TP9
Category	Thermostat
Language	English