22
TPOne-S
Service
Demo
Choose this feature to provide a demonstation of
the audible and visual warning which will be given
when service is due.
Installer Lock TPOne allows the installer to lock all installer
settings by means of a passcode. The 3 digit
passcode can be chosen and set by the installer
and once set will be required to make any installer
setting changes.
Installer
Reset
Select option to reset all installer settings to
factory defaults.
Note: Service interval will not be reset and can
only be reset or deactivated by entering the service
interval setup.
Installer Settings (Continued)
TPOne is an intelligent programmable heating control
made easy. TPOne includes features which are designed
to save energy. Look out for the leaf symbol throughout
this guide for settings which can directly influence the
energy saved.
To Next Page
Loading...
