Danfoss VLT CDS 803 Programming Guide

15-31 InternalFaultReason
Range: Function:
0* [-32767 -
32767 ]
View a description of the error. This
parameter is used with alarm 38,
Internal Fault.
3.11.3 15-4* Drive Identication
Parameters containing read-only information about the
hardware and software conguration of the frequency
converter.
15-40 FC Type
Range: Function:
0* [0 - 6 ] View the FC type code. The readout
is identical to the frequency
converter series power eld of the
type code denition, characters 1–6.
15-41 Power Section
Range: Function:
0* [0 - 20 ] View the FC type code. The readout
is identical to the frequency
converter series power eld of the
type code denition, characters 7–
10.
15-42 Voltage
Range: Function:
0* [0 - 20 ] View the FC type code. The readout
is identical to the frequency
converter series power eld of the
type code denition, characters 11–
12.
15-43 Software Version
Range: Function:
0* [0 - 0 ] View the software version of the
frequency converter.
15-44 Ordered TypeCode
Range: Function:
0* [0 - 40 ] View the type code string used for
reordering the frequency converter
in its original conguration.
15-45 Actual Typecode String
Range: Function:
0* [0 - 40 ] View the actual type code string.
15-46 Drive Ordering No
Range: Function:
0* [0 - 8 ] View the 8-digit ordering number
for reordering the frequency
15-46 Drive Ordering No
Range: Function:
converter in its original congu-
ration.
15-48 LCP Id No
Range: Function:
0* [0 - 0 ] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0* [0 - 0 ] View the control card software
version number.
15-50 SW ID Power Card
Range: Function:
0* [0 - 0 ] View the power card software
version number.
15-51 Drive Serial Number
Range: Function:
0* [0 - 10 ] View the frequency converter serial
number.
15-53 Power Card Serial Number
Range: Function:
0* [0 - 0 ] View the power card serial number.
15-57 File Version
Range: Function:
0* [0 - 255 ] Shows the le version.
15-59 Filename
Range: Function:
0* [0 - 16 ] View the current CSIV le name.
3.12 Main Menu - Data Readouts - Group 16
3.12.1 16-0* General Status
16-00 Control Word
Range: Function:
0* [0 - 65535 ] View the control word sent from
the frequency converter via the
serial communication port in hex
code.
Parameters
VLT
®
Compressor Drive CDS 803
58 Danfoss A/S © 06/2019 All rights reserved. MG18P202
33

Danfoss VLT CDS 803 Specifications

General

Brand	Danfoss
Model	VLT CDS 803
Category	DC Drives
Language	English