Enclosure Power [kW (hp)] Height [mm (in)] Width [mm (in)]
Depth
[mm (in)]
Mounting hole [mm (in)]
Maximum
weight
Size IP class 3x200–240 V 3x380–480 V 3x525–600 V A
A
1)
a B b C d e f kg (lb)
I2 IP54 – 0.75–4.0 (1–5) –
332
(13.1)
– 318.5 (12.53) 115 (4.5) 74 (2.9) 225 (8.9) 11 (0.43) 5.5 (0.22) 9 (0.35) 5.3 (11.7)
I3 IP54 – 5.5–7.5 (7.5–10) –
368
(14.5)
– 354 (13.9) 135 (5.3) 89 (3.5) 237 (9.3) 12 (0.47) 6.5 (0.26) 9.5 (0.37) 7.2 (15.9)
I4 IP54 – 11–18.5 (15–25) –
476
(18.7)
– 460 (18.1) 180 (7) 133 (5.2) 290 (11.4) 12 (0.47) 6.5 (0.26) 9.5 (0.37)
13.8
(30.42)
I6 IP54 – 22–37 (30–50) –
650
(25.6)
– 624 (24.6) 242 (9.5) 210 (8.3) 260 (10.2) 19 (0.75) 9 (0.35) 9 (0.35) 27 (59.5)
I7 IP54 – 45–55 (60–70) –
680
(26.8)
– 648 (25.5) 308 (12.1) 272 (10.7) 310 (12.2) 19 (0.75) 9 (0.35) 9.8 (0.39) 45 (99.2)
I8 IP54 – 75–90 (100–125) – 770 (30) – 739 (29.1) 370 (14.6) 334 (13.2) 335 (13.2) 19 (0.75) 9 (0.35) 9.8 (0.39) 65 (143.3)
1) Including decoupling plate
The dimensions are only for the physical units.
NOTICE
When installing in an application, allow space above and below the units for cooling. The amount of space for free air passage is listed in Table 3.1.
Table 3.3 Dimensions, Enclosure Sizes I2–I8
Installation
VLT
®
HVAC Basic Drive FC 101
8 Danfoss A/S © 05/2016 All rights reserved. MG18A802
33
To Next Page
Loading...
