Parameter Range Default Usage
Parameter 0-03 Regional
Settings
[0] International
[1] US
[0] International –
Parameter 0-06 GridType [0]–[132] see Table 4.4. Size selected Select the operating mode for restart after reconnection of
the frequency converter to mains voltage after power-
down.
Parameter 1-00 Conguration
Mode
[0] Open loop
[3] Closed loop
[0] Open loop Select [3] Closed loop.
Programming Quick Guide
MG18A802 Danfoss A/S © 05/2016 All rights reserved. 31
4 4
To Next Page
Loading...
