[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Timeout 3
[71] SL Timeout 4
[72] SL Timeout 5
[73] SL Timeout 6
[74] SL Timeout 7
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
3.13.6 13-5* States
Parameters for programming the Smart Logic Controller.
13-51 SL Controller Event
Array [20]
Option: Function:
Select the Boolean input (TRUE or FALSE) to define the smart logic controller event.
See par.13-02
Stop Event
for further descriptions of choices and their functions.
[0] * FALSE
[1] TRUE
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
[8] Below I low
[9] Above I high
3 Parameter Description VLT
®
HVAC Drive Programming Guide
3-130
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
