Danfoss VLT PROFIBUS DP MCA 101 - Page 49

Parameter Default value Range Conversion index Data type
Parameter 16-90 Alarm Word 0 0–FFFF 0 Uint32
Parameter 16-92 Warning Word 0 0–FFFF 0 Uint32
Table 6.2 PROFIBUS-specic Parameter List
* Indicates a default setting.
Refer to the relevant operating instructions for a comprehensive parameter list.
Parameters Programming Guide
MG37G202 Danfoss A/S © 01/2016 All rights reserved. 47
6
6