EasyManua.ls Logo

Danntech Bob 2020 - Placement and Power Connection

Danntech Bob 2020
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bob’s 4 feet can be adjusted up to +1cm (+0,4in)
to ensure that it is in a perfectly horizontal
position.
2 | scope of application and place of
use
2.1 | Scope of application
Warning: Bob’s inclination shall not exceed 2° in order
to avoid possible flooding.
Precautions against frost:
Bob shall not be stored in a place with a temperature
lower than 0°C. If such a situation could occur,
ensure that Bob has been drained using the draining
program within the settings menu (refer to page 25)
and remove the inlet water hose.
Because of its small size, Bob fits everywhere!
i
At home On vacation At the office
Bob might be humid inside
when you receive it. In fact,
every Bob has been tested
before shipping (empty cycle
with clear water). Therefore,
there might still be some
traces of residual water.
19,3 in
19,3 in
13,4 in
3
QUICK SET-UP GUIDE
2
QUICK SET-UP GUIDE
1 | delivery, unpacking and transport
Here we go: Your Bob has just been delivered.
To carry Bob, please use the handles
located at the bottom of the
appliance.
Please keep Bob’s packaging for
future transportation purposes and
for the after sales services.
This bag can be reused in your everyday life
(shopping, laundry, etc...)
Empty, Bob only weighs 10 kg (22 lbs) and is
easy to carry.
Fold the delivery box and place it in a dry place
(e.g. below your bed or inside a wardrobe).
Open the package and take Bob out
using the provided protection bag.
100% recycled packaging
Here are the handles!
i
i
i