Danntech Bob 2020 - Creating and Deleting a Custom Program

y Go to “Settings” and
choose “Create new
cycle”
y Use the buttons and to choose a duration
from 10 to 120 minutes.
y Confirm your choice by pressing the central button.
y Use the buttons and to choose the
temperature from 30°C to 70°C
y Confirm your choice by pressing the central button.
y Use the buttons and to choose an icon for
your program.
y Take your time, you have 12 icons to choose from!
y Confirm your choice by pressing the central button.
y Once those 3 parameters are defined, you will
be asked to confirm your custom program.
y Select to save your custom program.
y Select to cancel the custom program and
be redirected to the “Create a cycle” screen.
In case of an incorrect entry: unfortunately, it is not possible to go back if you
have selected a parameter you did not want to. Thus, you must continue with the
remaining steps and cancel it on the final release screen . You can then start to
create custom program again.
i
30
Parameters
14
1
Create a new cycle
3
1
Duration
40 MIN
3
2
Temperature
70°C
3
3
Icon
3
3
Confirm cycle?
40 MIN
70°C
Cycle 1
How to create a custom program?
3.3 | Creating and deleting a custom
program
Before creating your own program:
When creating your own program, you have different options to fine-tune 3
parameters:
y The program duration (not including drying)
y The maximum temperature during the program
y The icon for your custom progra
For instance, you can create a custom program at 60°C for special dishes.
If you have particularly fragile dishes, you should prefer a longer duration of
about 90 minutes but a lower temperature (e.g. 50°C)
If 20 minutes does not seem sufficient for you, you might add some additional
time.
It’s up to you to create the most adapted program for your dishes!
You can create up to 4 custom programs Once the limit is reached, you must delete
a program (on the screen Settings > Delete cycle) to create a new one.
Daan Tech does not commit to the washing performance of a custom program.
i
Bob allows you to create your own program to adapt to
your personal needs and to optimise the washing of your
dishes.
Rename a custom program
If Bob is connected to Wi-Fi and paired to your Daan Tech account, you
can change the name of your custom programs from the “Manage my
Bob” tab.
45
QUICK UTILIZATION GUIDE
44
QUICK UTILIZATION GUIDE