Danntech Bob 2020 - Power Plug

3.4 | Power plug
Before you connect Bob to the power supply, please make sure that the voltage on
the type plate corresponds to the voltage of your power supply.
The appliance must be placed on an even and stable surface. Daan Tech is not liable
for any damage caused by placing the device on an uneven and/or unstable surface
during use.
WARNING: Please turn the power supply off before installing Bob.
Do not plug or unplug by pulling
the cord, but always pull the
plug directly.
Connect the power cable to Bob’s back.
Connect the power cable to a 220- 240V
50-60Hz plug.
3.3 | Anti-theft
Anti-theft devices are available
on Daan Tech’s website.
Because your Bob is precious, it comes with a built-in anti-
theft feature. All you need to do is lock the anti-theft device
on the back with one of the two provided keys.
i
Please scan the QR code to
check it out.
9
QUICK SET-UP GUIDE
8
QUICK SET-UP GUIDE