Dantherm CDT 30 MK III User Manual

19
053322 • Version 1.0 • 5.12.2019
en
Preventive maintenance, cont.
Checklist (User)
– page 1
X
Electrical equipment: Internal cabling (Take care of hot surfaces! Remove front grille and inspect cables inside the unit.)
÷
√
Criteria
Acceptance: User manual available
Acceptance: Markings are readable.
Non
-
acceptance: The markings must be
replaced, if they are damaged, altered or unreadable.
Acceptance: No damages or fractures on plug and cables.
Acceptance: The connector fits to the supply plug or is equipped with an adapter.
Acceptance: Cables are fitted into termi- nals.
Acceptance: No damages or fractures on plugs and
cables.
How to
Visually
Visually
Check that all markings are readable and in original form
-
without any damages
or alterations.
Visually.
Check that plug and cables are without any damages or fractures.
Visually
Check that the connector on the
cable fits
to the supply plug.
Visually
Check that all connections are fixed and mounted correctly onto the terminals.
Visually
Check that plugs and cables are without any damages or fractures.
Frequency
D Y Y Y Y M M Y Y
What
User manual: Is the user manual available in the local language
Marking
Type plate
Item no.
Inspection marking
Warnings
Electrical equipment: Supply cord
Plug and cable
PE-
plug (earthing)/ adapter
Mounting
Plug and cables

Dantherm CDT 30 MK III Specifications

General

Brand	Dantherm
Model	CDT 30 MK III
Category	Dehumidifier
Language	English