Dantherm CDT 30S MK III - User Checklist - Page 2

20
Preventive maintenance, cont.
Checklist (User)
- page 2
X
÷
√
Criteria
Acceptance: Start dehumidifier, check that hour counter is working.
Acceptance: Start
dehumidifier, check
that MED
-counter measures the power
consumption.
Acceptance: Light in display. Display is readable.
Acceptance: Clean, free of oil and dirt.
Acceptance: Ventilation openings are free of dust and dirt.
Acceptance: Deformation < 5 mm
deep.
Openings between plates < 5 mm.
Acceptance: No loose or missing screws. No obvious damages on handle. The handle slides up and down easily. The handle cannot slide up and down, when thumbscrews are tightened.
Acceptance: Gaskets are complete and without any cracks.
Acceptance: Wheels run freely
– without
hindrance. No obvious damages on the track of the wheels.
How to
Visually
Visually
Visually
Visually
Visually
Visually Measuring tape
Manual check
Visually
Visually
Frequency
Y
Y
Y
M
M
Y
Y
Y
Y
What
Does operation hour counter work?
Does the MED
-counter work?
Display
The casing of the dehumidifier
Cleaning
Free passage through ventilation open- ings
Deformations, cracks or fractures
Fixation and damage of handle
Gaskets and sealings
Visual
check of the wheels