Dantherm HCV 3 Installation And Service Guide

48
Fittings and installations, continued
Drifting snow and
driving rain
Air inlets and outlets T1 and T4 must be mounted with ducts falling at least fall 1 %
away from the unit to prevent drifting snow, driving rain and condensation from entering
the unit causing faults and further damaging the installation and the building.
The warranty does not cover damages to the unit/building parts/insulation, which is
caused by accumulated snow/water in the ducts.
Accessories In order to mount and install accessories from Dantherm Air Handling A/S, follow the
instruction delivered with the accessory.

Dantherm HCV 3 Specifications

General

Brand	Dantherm
Model	HCV 3
Category	Air Handlers
Language	English