Dantherm HCV 5 Installation Manual

8
Assembly, continued
Step
Action
12
Assemble the plug's protection with
the screws included.
13
Adjust the unit by following the Adjustment instructions
Drifting snow, driv-
ing rain and conden-
sation
Air inlets and outlets T1 and T4 must be installed across the ceiling with a gradient
away from the ventilation system. The purpose is to prevent any drifting snow, driving
rain or condensation running down into and damaging the ventilation system, installa-
tion and house.
The warranty does not cover damage to the unit, building parts or insulation caused by
accumulated snow/water in the ducts.
Optional extras
To install optional extras from Dantherm Air Handling A/S, follow the instructions sup-
plied with the part.

Dantherm HCV 5 Specifications

General

Brand	Dantherm
Model	HCV 5
Category	Air Handlers
Language	English