Dantherm HCV 5 Installation Manual

2
General information
Introduction
This section provides general information about the installation manual and the unit.
Manual product
number
The product number of this installation and service manual is 070719.
Target group
The target group for this manual is the engineers installing and adjusting the unit, and
carrying out preventive maintenance and replacing defective parts.
Copyright
Copying this manual or parts thereof is not permitted without prior written permission
from Dantherm Air Handling A/S.
Reservations
Dantherm Air Handling A/S reserves the right at any time to make changes or improve-
ments to the product and installation and service manual without prior notice or obliga-
tion.
EU Declaration of
Conformity
Dantherm Air Handling A/S, Marienlystvej 65, DK-7800 Skive declares at its own liability
that the following product:
352425 HCV 4
352422 HCV 5v12
covered by this declaration, complies with the following directives:
2006/42/EC Machine Safety
2006/95/EC LVC Directive (low voltage)
2004/108/EC EMC Directive
2002/95/EC RoHS Directive
2002/96/EC WEEE-direktiv
- and is manufactured in compliance with the following harmonised standards:
EN 12100 Machine Safety
EN 60 335-1 Low Voltage
EN 60 335-2 Low Voltage
EN 61 000-6-1:2007 EMC Immunity
EN 61 000-6-3:2007 EMC Emission
EN 55 014-1:2007 EMC Emission
EN 55 014-2:1997 EMC Immunity
EN 55 022:2006 Radio Interference
Skive, 28.05.2009
Disposal
The unit is designed to last for many years. When the times comes for the unit to be
disposed of, such disposal must be carried out in compliance with national legislation
and procedures to protect the environment.

Dantherm HCV 5 Specifications

General

Brand	Dantherm
Model	HCV 5
Category	Air Handlers
Language	English