This remote control is designed for the particular and considerate houseowner
especially keen to provide a pleasant indoor climate in his house and to its occupants.
The remote control communicates wireless with the control panel of the ventilation unit
up to a range of 30 meter through walls and lightweight floors.
emote control can be placed on the shelves or it can be hung on the wall in the
kitchen or in the sitting room. Hereby the occupants of the house can look after the i
door comfort and easily adjust the mode of operation if necessary.
following functions can be controlled/activated with the remote control:
• Automatic demand-control based on relative humidity, or CO
2
(accessory)
• Manual operation
• Week program mode
• Away mode
• Night mode
• Temperature control - heat, (only possible with after heating coil which is an
optional accessory)
• Temperature control – BYPASS-COOLING, by means of built-in bypass
• Adjust filter change intervals
On the remote control the user can read off the following:
• Fan step
• Outdoor temperature, supply air temperature (into the house), exhaust air tem-
perature (from the house) and room air temperature (measured in the remote
control)
• Day of the week and hour
• Relative humidity in the exhaust air duct (the humidity of the house)
• CO
2
level in the house (only possible with an extra CO
2
sensor which is an op-
tional accessory)
• Remaining filter time
• Alarms + acoustic beeper
To Next Page
Loading...
Need help?
General
