Dantherm HRC 2 User Manual

7
065379 • Version 1.1 • 06.03.2013
User menu
User menus
In the USER MENU you will find the following operating programs and operating info:
Navigation button
Button
Function
Activates the user menu, a menu point or confirms settings by pressing the
CENTER button.
Navigates between menu points by pressing LEFT or RIGHT on the naviga-
tion button.
Reduces or increases values by pushing UP or DOWN on the navigation
button.
Short cuts
Brug navigationstasten
som beskrevet i skemaet herunder:
Button
Function
Press CENTER for 3 seconds = back to start, leave all menus
Press DOWN for 5 seconds = activate/deactivate bypass-cooling for 6
hours (BYP6)
Press UP for 5 seconds = activate/deactivate fireplace mode for 15 min.
(FP15)
Press RIGHT for 10 seconds = activate/deactivate installer menu / installa-
tion mode. (only for trained users/installers)
Press CENTER + UP for 10 seconds = back to factory setting of all settings
and setpoints. (Only works in the installer menu)
Press LEFT for 10 seconds = reset pairing
Continued overleaf

Dantherm HRC 2 Specifications

General

Brand	Dantherm
Model	HRC 2
Category	Remote Control
Language	English