Dantherm HRC 2 User Manual

6
Display information
Display
overview
Display description
The following table describes the symbols and buttons on the remote control.
The remote control has an energy saving function which switches off
the display be-
tween 23:00 and 7:00. It can, however, be switched on by pressing one button.
Display area
Function
Operating programs
Automatic operation/demand-control
Manual operation mode
Week program mode
Away mode
Night mode
Hour / Day
The clock is used to control week program mode and
night mode.
Info line
Alarm
Information about various functions and programs
Battery low
Fan step
Four oval fields indicating current fan speed
Navigation button
The button is used to activate the user menu, navigate be-
tween menu points, and reduce or increase values.
Operating instructions
Shows information about:
• Filter change
• Room temperature
• Supply/extract air temperature
• Outdoor temperature
• Relative humidity in the extract air from the house
• CO
2
level in the air (accessory)
• Heat recovery / bypass-cooling
OPERATING PROGRAMS
OPERATING INFORMATION
INFO LINE
FAN SPEED
NAVIGATION BUTTON
HOUR/DAY

Dantherm HRC 2 Specifications

General

Brand	Dantherm
Model	HRC 2
Category	Remote Control
Language	English