EasyManuals Logo

Dantherm RCV 320 P2 Basic User Manual

Dantherm RCV 320 P2 Basic
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
USER MANUAL
Operation: Temporary modes (override)
When summer mode is active, this will stop the supply air fan and only the extract air fan will
be in operation. In this case, a fresh air supply can be ensured by opening windows, doors,
etc.
NOTE: Summer mode will be deactivated automatically when the outdoor temperature
drops below 14°C.
Long press (ve seconds) - activate/deactivate summer mode
Active summer mode is indicated by a ashing light in the corresponding LED
Activation of the replace mode can be used when you light up the stove. The unit will then
run with positive pressure for seven minutes to prevent smoke in the living room. If the re-
place mode is not deactivated manually, it will automatically stop after seven minutes.
d: The replace mode is only activated as long as the supply air temperature is above 9°C.
Long press (ve seconds) - activates/deactivates replace mode.
Active replace mode is indicated by ashing in the three fan speed LEDs
Summer mode
Fireplace mode

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dantherm RCV 320 P2 Basic and is the answer not in the manual?

Dantherm RCV 320 P2 Basic Specifications

General IconGeneral
BrandDantherm
ModelRCV 320 P2 Basic
CategoryFan
LanguageEnglish

Related product manuals