Dantherm RCV 320 P2 Basic User Manual

11
USER MANUAL
Maintenance and care: Inspection of the lter
en
Maintenance and care
Inspection of the lter
Preventive maintenance is necessary at regular intervals if the unit is to operate eciently
and optimally without unintended stoppages, and to ensure the expected service life of at
least 10 years.
It is important to notice that intervals between lter maintenance can vary according to the
specic environment, and that moving parts are wearing parts, and will need replacement
when worn.
The factory warranty only applies if it can be documented that regular preventive main-
tenance has been carried out as prescribed. The documentation can be a written logbook
containing a company stamp or equivalent.
The lters are the only parts that the user can maintain himself.
Maintenance of the lter must as a minimum be carried out as shown here:
Interval Task To be carried out by:
Six
months
Check lters. Replace if necessary User
Annual Change lters User
Other components must be inspected at least every second year by trained professionals (see
page 40). Remember to contact a trained professional for a service check regularly.
The unit has a built-in timer for its lter alarm (every six months as standard). The timer period
for the lter alarm can be changed via the remote control or PC Tool, or it can be reset via the
alarm button
When the timer expires, a lter alarm is triggered. A buzzer will sound and the LED “!” will light
up orange. (If the LED lights up red, please see Troubleshooting section on page 44.
Press for 5
sec.
Resets the lter alarm when the alarm is triggered
Resets the lter timer without the timer having expired.
A short beep will sound, indicating that the lter alarm has been reset correctly.
Step Action Illustration
1 Remove the lters and inspect them after
the lter alarm has been triggered.
2 Even if only one lter is clogged, we recom-
mend replacing both lters to avoid imbal-
ance in the airow through the unit.
NOTE: Replace the lters at least once a year,
regardless of whether they are clogged or an
alarm has been triggered.
3 Make sure that the lters are inserted the
right way. The arrows on the lter must point
in the direction shown here.
Introduction
Summary of
intervals
Filters - alarm and
inspection
(6 months - 1 year)

Dantherm RCV 320 P2 Basic Specifications

General

Brand	Dantherm
Model	RCV 320 P2 Basic
Category	Fan
Language	English