EasyManua.ls Logo

Dantherm RCV 320 P2 Basic - Installation and Service Manual; Manual Introduction, Safety, and Overview

Dantherm RCV 320 P2 Basic
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Introduction: Overview
en
INSTALLATION & SERVICE
MANUAL FOR PROFESSIONALS
Introduction
Overview
This part of the manual, titled INSTALLATION & SERVICE MANUAL, is intended for qualied
personnel only.
It is important to know the correct operating procedure for the residential ventilation system
and all its safety measures. Dantherm accepts no liability with regard to lost business or per-
sonal injury as a result of non-compliance with safety measures.
Risk of injury
Installation and repair of the unit must be carried out by qualied personnel only.
It is the responsibility of the installer to read and understand this service manual
prior to initial startup and setup of the RCV unit.
Risk of damage to equipment or property or personal injury
The RCV MUST be earthed with cables WITH earth wire and an earthed power supply.
Risk of water damage
Never turn o the ventilation unit to save energy, as this may cause condensation and
subsequent leaks from the duct system, with the risk of water damage.
Injury caused by electric shock and risk of damage to the device
Disconnect mains plug from electrical outlet before you perform one of the following actions:
remove the front cover
open into the main PCB
(eg. in order to change operating mode using the A-B function switch)
install, maintain, repair or dismantle the unit
Target group
Safety precautions
Warning
Caution
WARNING
Warning
Caution
WARNING
Warning
Caution
CAUTION
WARNING

Related product manuals