Dantherm RCV 320 P2 Basic - Page 34

34
INSTALLATION & SERVICE MANUAL FOR PROFESSIONALS
Installation: Mounting the device
Follow these steps, when mounting the RCV 320 on the oor.
Step Action Illustration
1 Install the Dantherm approved oor brackets (accessory) on the RCV unit to ensure
that the system is raised from the oor in a safe manner.
Note: Dantherm accepts no liability to oor brackets from other suppliers. Use of
other (non-Dantherm) constructions is at your own risk.
2 Place the unit on the con-
struction and make sure it is
levelled.
CAUTION
If the unit tilts forwards,
there is a risk of water
damage.
• Make sure the unit is lev-
elled or tilts backwards.
Floor mounting
!
Warning
Caution